Notes and maintenance of the security of the banknote detector
category：products information Time：2020-04-26
Notes and maintenance of the security of the banknote detector
The power socket connected to this machine must be well grounded, do not place it in a humid place, be careful of leakage, and use the power supply voltage value within the specified range AC 220V50HZ ± 10
This machine is suitable for working in the temperature range of 0 ° C-40 ° C. If it is below 0 ° C or above 40 ° C, it will make the machine difficult to work normally
When using this machine, avoid electrical appliances that may cause strong interference to the circuit (such as mobile phones, electric drills, welding machines, etc.), and avoid direct light and strong magnetic field interference, so as not to cause supervision failure
Do n’t forget to unplug the adapter that activates the sensor when you want to draw out the banknote input version, so as not to break or loose the wire
The dust accumulated in the machine should be cleaned regularly, and the power supply must be cut off and the power socket unplugged
When not using for a long time or when the operator leaves, be sure to cut off the power
When the following conditions occur, the power supply should be cut off and professional maintenance personnel should be notified to carry out maintenance-(1, the liquid is spilled on the machine; 2. The machine is seriously damaged; 3. The machine performance has abnormal changes; 4. The correct operation according to the instructions still does not work )
The power socket connected to this machine must be well grounded, do not place it in a humid place, be careful of leakage, and use the power supply voltage value within the specified range AC 220V50HZ ± 10
This machine is suitable for working in the temperature range of 0 ° C-40 ° C. If it is below 0 ° C or above 40 ° C, it will make the machine difficult to work normally
When using this machine, avoid electrical appliances that may cause strong interference to the circuit (such as mobile phones, electric drills, welding machines, etc.), and avoid direct light and strong magnetic field interference, so as not to cause supervision failure
Do n’t forget to unplug the adapter that activates the sensor when you want to draw out the banknote input version, so as not to break or loose the wire
The dust accumulated in the machine should be cleaned regularly, and the power supply must be cut off and the power socket unplugged
When not using for a long time or when the operator leaves, be sure to cut off the power
When the following conditions occur, the power supply should be cut off and professional maintenance personnel should be notified to carry out maintenance-(1, the liquid is spilled on the machine; 2. The machine is seriously damaged; 3. The machine performance has abnormal changes; 4. The correct operation according to the instructions still does not work )
